MYJET 60cm All-In-One DTF

Description

MYJET 60cm All-In-One DTF Printer

The MYJET 60cm All-In-One DTF Printer combines printing, powdering, melting, and cooling into a single 600mm-wide machine. As a result, you skip the separate oven and shaker unit that standalone DTF printers require. This machine suits shops producing T-shirt transfers, canvas bag prints, and custom footwear graphics, especially when you want a compact, single-operator workflow from file to finished transfer.

Why Eloquent Prints Recommends This Machine

Most entry-level DTF setups force you to print on one machine, then shake powder by hand and bake sheets in a separate oven. In contrast, the MYJET all-in-one folds every step into one footprint. For instance, it powders on a timer automatically, purifies smoke during the baking stage, and cools finished film to a safe handling temperature before it leaves the line. Consequently, a shop running high transfer volumes without a dedicated production floor saves both space and labor.

Built for Reliability at Speed

A Hiwin guide rail keeps carriage movement precise and quiet, while a collision-prevention device shields both the carriage and the nozzles from accidental strikes. Meanwhile, brushless motors extend the machine’s service life, and an adjustable paper pressure roller feeds thermal-melting film smoothly without scratching the nozzle plate. In addition, a spiral powder brush distributes adhesive powder evenly at set intervals. Therefore, you avoid the clumping and buildup that shorten a print head’s life on cheaper units.

Choose Your Print Head for Your Output Needs

The MYJET 60cm All-In-One DTF ships in three head configurations, and each one runs two print heads:

• Epson XP600 — a budget-friendly option for lower-volume shops
• Epson i1600 — a mid-tier choice that balances speed and print quality
• Epson i3200 — the fastest option, designed for high-volume production runs

Technical Specifications

How It Compares to a Standalone DTF Setup

A separate DTF printer plus powder-and-oven unit typically demands more floor space, more power connections, and a second operator to shuttle sheets between stages. By contrast, the MYJET all-in-one handles powdering, melting, and cooling within the same footprint as the printer itself. So, this machine suits shops that want DTF output without expanding their production line. However, if you run a high-volume roll-to-roll operation or need output wider than 600mm, MYJET’s dedicated UV DTF or hybrid printer lines will serve you better.

Where It’s Used

The 60cm working width covers the most common DTF applications: T-shirt and apparel transfers, canvas bag prints, canvas shoe graphics, and general soft-goods textile printing.

Frequently Asked Questions

What print head should I choose for my shop’s volume? Choose the Epson XP600 if you run a lower-volume or budget-conscious shop. Alternatively, pick the i1600 for a balance of speed and cost as you grow, or the i3200 if throughput matters most for high-volume production.

Does this machine require a separate powder shaker or oven? No. Since powdering, melting, and cooling happen inside the machine itself, you don’t need to buy or house separate equipment for those stages.

What type of film does the MYJET 60cm All-In-One DTF use? It uses thermal-melting (hot-melt) transfer film, which matches the pigment ink the printer applies during the printing stage.

What RIP software is compatible with this printer? You can run Maintop 6.1 or PhotoPrint, and both communicate with the Hoson control system through an RJ-45 network connection.

What computer specs do I need to run this printer? For smooth RIP performance, use a 64-bit Windows 7 or 10 machine with an i7 processor, at least 8GB of RAM, a 500GB+ SSD, and a dedicated graphics card with 4GB of memory.

Ready to Add DTF Printing to Your Shop?

Contact Eloquent Prints for pricing and availability on the MYJET 60cm All-In-One DTF Printer, and ask about head configuration options so you can match the machine to your production volume.